| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Redwood SJ Heads to Tonys! PICS http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=1688 |
Page 1 of 1 |
| Author: | LanceK [ Fri Apr 15, 2005 11:40 am ] |
| Post subject: | |
Today I was able to finish up the LS redwood Rosewood SJ. Tommorow im driving out (2 hrs) to meet Tony Ferguson and pick up the LS COCO Om. Im going to drop off the Sj at the same time. Here are a few pics, the neck still needs a little work, and will make the trip to Tonys Via UPS next week. Thanks for looking --- 
|
|
| Author: | BruceH [ Fri Apr 15, 2005 12:12 pm ] |
| Post subject: | |
Looks good, Lance. What are you using for binding? It's hard for me to tell from the pics. Maple? |
|
| Author: | LanceK [ Fri Apr 15, 2005 12:26 pm ] |
| Post subject: | |
Thanks Bruce- Im using Curly Koa I got from BeachTonewood - 
|
|
| Author: | Dave Rector [ Fri Apr 15, 2005 12:34 pm ] |
| Post subject: | |
Nice looking guitar Lance! Love the koa binding. I talked to Tony yesterday and he said you were coming up this weekend. Tell him I'm still figuring out the best way to ship things to him, then I'll be in touch. Can't wait to see that one with the finish on it 
|
|
| Author: | FrankC [ Fri Apr 15, 2005 12:50 pm ] |
| Post subject: | |
Nice work lance. my comps graphics are poor (I am on my work comp), does your purfling on the bindings separate the binding from the end graft or is the endgraft tucked into the binding for that continuous look? I can't tell from the pic on this comp. i do love those bindings |
|
| Author: | Steve Kinnaird [ Fri Apr 15, 2005 2:10 pm ] |
| Post subject: | |
Quite nice, Lance. You seem blessed with very good taste. Any trouble locating the case? Looks like a good fit. Steve |
|
| Author: | WalterK [ Fri Apr 15, 2005 5:17 pm ] |
| Post subject: | |
Another Gem Lance!!! Amazing!!! Thanks for the pic's. 
|
|
| Author: | Matt Gage [ Fri Apr 15, 2005 10:19 pm ] |
| Post subject: | |
Looks good bud, I like the headstock logo, thats new right? |
|
| Author: | LanceK [ Fri Apr 15, 2005 11:59 pm ] |
| Post subject: | |
Thanks Matt - Well its not new, be a new headstock and logo orientation -
|
|
| Author: | Wade Sylvester [ Sat Apr 16, 2005 3:53 am ] |
| Post subject: | |
That’s a beauty Lance! I like the grain orientation of the sides and how it matches at the end graft. Crisp job. |
|
| Author: | LanceK [ Sat Apr 16, 2005 11:39 pm ] |
| Post subject: | |
Thanks Steve - actually thats a Martin OM case - its my temp case until the Cedar Creek arrives - I agree thought, it does fit nicly
|
|
| Author: | LanceK [ Sat Apr 16, 2005 11:40 pm ] |
| Post subject: | |
Thanks Frank - ya the binding and side purf's run all the way around, I usually miter them but didn't on this one. |
|
| Author: | LanceK [ Sat Apr 16, 2005 11:43 pm ] |
| Post subject: | |
Dave- I'm building a box that is going to house the body and neck side by side, it will have a 6" foam base with a 6" foam cut out that will fit a variety of sizes, the neck will sit next to it, and finally a 6" foam top, with 1/8" board all the way around, and it will drop into a cardboard box. Ill snap some pics when I'm done, I need something to use over and over - and something thats very safe -- |
|
| Author: | Dave-SKG [ Sun Apr 17, 2005 8:07 am ] |
| Post subject: | |
Shipping box sounds like a great idea! The guitar looks beautiful can't wait to see it once it's sprayed. Urethane again? Is that all tony does or is it your preference? |
|
| Author: | LanceK [ Mon Apr 18, 2005 12:15 am ] |
| Post subject: | |
its all Tony does - |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|